ecuhelpshopKT20022.12.10 Renault Master 2.3 dCi SID310 *CAN via OBD OK
KT200 2022.12.10 Renault Master 2.3 dCi SID310 *CAN via OBD read and write is OK. Both online version and offline workstation is tested working fine. ecuhelp KT200 ecu programmer plus…
A Comprehensive Guide to install KT200 Offline Workstation
5 steps to install KT200 USB dongle and use KT200 offline workstation.
KT200 ECU Programmer Test Reports Yes & No
KT200 is able to do ECU maintenance chip tuning, DTC code removal, OBD/BOOT/BDM/JTAG, and multiple protocols. KT200 ECU programmer is tested working fine by an increasing number of users.
SIM271D1 is supported by KT200 ECU Programmer
Mercedes SIM271D1 ECU is confirmed that KT200 ECU Programmer can read and write it via Boot/tricore method. Enjoy! KT200 ECU Programmer tech support: www.ecuhelpshop.com
How to use KT200 read and write Marelli 4AVP?
KT200 can read and write Marelli 4AVP successfully.
KT200 offline workstation with USB Dongle
ECUHELP KT200 offline workstation. No need to connect to internet. Just plug the USB dongle (as shown below), the KT200 reads and writes the ECU /TCU via OBD/Bench/Boot/BDM/Jtag as perfectly…
How to fix KT200 Audi A6 “Turn the dashboard off and wait”?
Look at the following image, used ecuhelp KT200 to write flash data for Audi A6 and it prompts “Turn the dashboard off and wait” . Possible reasons: Wrong modified file.…
KT200 Full clone Audi A6 Bosch Diesel EDC17C46
ECUHELP KT200 ECU Programmer is tested able to full clone Audi A6 Bosch Diesel EDC17C46. Look at the ECU board of Bosch Diesel EDC17C46: Open ECU Connect the cable boot…
KT200 ECU Programmer Questions and Answers
For users of ECUHELP KT200 ecu programmer, this articles put together some questions and answers, hope it helps! If any more question, contact at ecuhelpshop.com. 1st question:Question on KT200 ecu…