ECUHELP KT200II ECU Programmer is confirmed to read/write Ford Siemens SID206 Bench mode.
Kit to use:
– Multifunction cable
– Color flat cable
Connect the multi-function cable as follows the JTAG flat as shown:
To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x
Alternatively, connect Siemens adapter.
Use:
– Multifunction cable
– Siemens/Marelli adapter
– Grey flat cable
– Connectors dip/sip
Solder the dip/sip connectors on the pcb and do a link:
Insert Siemens adapter as in photo:
Use KT200II to read and write use the following driver:
→ BDM / JTAG MODE
→ BDM MPC
→ MPC 55x/56x