KT200 ECU Programmer: Read/Write Bosch EDC17C64 On Bench or Via OBD?
Vehicle Specifications:
Model: VW Golf 7 – 5G1/BQ1
ECU Type: TDI Bosch EDC17C64
Objective: Assess the capability of the KT200 ECU Programmer to read and write the Bosch EDC17C64 ECU, OBD or Bench mode.
Source of ECU Programmer: KT200 is available for purchase from ecuhelpshop.com.
1.Using KT200 to Read/Write EDC17C64 via OBD:
Someone tested approximately 25 EDC17C64 done on Golf vehicles, with all done on the server vag self dcm6.2v.
Someone reported the following error, the possible reason is KT200 has no vr file for the car. please ask someone to obtain the original file.
For the Audi A4 B8.5 2015 2.0TDI EDC17C64, the KT200 ECU programmer completed a virtual read automatically in about 10 seconds without any problem.
The entire process, including VIRTUAL READ + write OBD. write/checksum, ok in approximately 10 minutes. Virtual read 100% and it was cross-verified with pcmflash original, revealing identical files.
Another review highlighted the success of the virtual read and write process for Edc17c64, and dpf egr off.
read it automatically, download the file from the server edit it and the turn is play. Writing was completed in roughly 12 minutes.
2. Using KT200 to Read/Write EDC17C64 On Bench:
Always read/write EDC17C64 on bench, even if it means 15 minutes more for its disassembly, never failed and it’s the safest.
The pinout of KT200 on BOSCH EDC17 C64 [ 1797 ] – VW, Audi, Seat, Skoda [Diesel], then to read and write the ECU.
Alright, hope it helps.