Unlock the full potential of your Fiat, Alfa Romeo, and Lancia vehicles equipped with the Bosch ME7.9.10 system using the ECUHELP KT200. This tool excels in reading and writing operations, as evidenced by the accompanying images that demonstrate a 100% success rate.
1.Full system mode:
ECUHELP KT200 wiring diagram of BOSCH ME7.9.10 – Fiat, Alfa Romeo, Lancia [Gasoline]
To connect to the control unit use:
– Multifunction cable
2.Boot mode
KT200 wiring diagram of BOSCH ME7.9.10 [ST10F275] – Fiat, Alfa Romeo, Lancia [ Gasoline ]
Kit to use:
– Multifunction cable
– 2 resistances of 100 Ω
Connect multifunction cable and the resistances as shown.
To read and write use the following driver:
→ TOOLS BOOT MODE
→ ST10Fxx
→ ST10F273 / ST10F275 / ST10F276 *K
or
→ ST10F273 / ST10F275 / ST10F276 *CAN
3.Boot mode (with BBV2)
KT200 wiring diagram of BOSCH ME7.9.10 [ST10F275] – Fiat, Alfa Romeo, Lancia [ Gasoline ]
Kit to use:
– Multifunction cable
– Bench Box v.2
This connection mode is available for tool v.2020 – since Firmware v70.
Connect the multifunction cable and the bench box as shown:
To read and write use the following driver:
→ TOOLS BOOT MODE
→ ST ST10Fxxx
→ ST10F273 / ST10F275 / ST10F276 *K
or
→ ST10F273 / ST10F275 / ST10F276 *CAN
By following these guidelines, ECUHELP KT200 becomes a versatile and reliable tool for managing the Bosch ME7.9.10 systems, ensuring precise and effective operations in both full system and Boot modes.