ECUHELP KT200 has been rigorously tested and proven effective in performing read/write operations on the EDC16CP31 ECU on Vench, eliminating the need for an extra adapter like the FC200. Step-by-Step…
One user feedback: ECUHELP KT200 read Bosch md1cs003 (0281037101) OK, but when writing a new file got ERROR ERASE (shown as the following images). Car Year: 2021 Ecu year:19/10/202/ When…
ECUHELP KT200 Full Version ecu programmer is confirmed to read/write Volvo Renault TRW EMS 2.2 and 2.3 without any problem. Part 1. KT200 read/write Volvo Truck TRW EMS2.2 no problem.…
Have you taken a closer look at ECUHELP KT200's PCB? If you examine the image below, you'll spot a distinct jumper. At times, there's a need to connect two points…
We've verified that the ECUHELP KT200 can successfully read/write mevd17.2.G on Bench. Nevertheless, a user encountered the “Error Sensor Level” issue, accompanied by a low 12V battery indication. For clarity,…
ECUHELPshop.com Anniversary on Sale. Valid: 8th August - 22th August Worldwide Free Shipping KT200 car/truck version (in a suitcase):519euro KT200 Full Version (in a suitcase):625euro KT200 Full version + offline…
KT200 ECU Programmer is having trouble connecting to the EDC16C1 ECU. Even with the pinout adhering to software instructions, the error message appears: "Turn off dashboard and turn it back…
Question: Can KT200 Read/Write EDC15? Absolutely! (Tested) more than 100 edc15 programmed by KT200 ECU Programmer and not a single failure, you only have to do a manual checksum (using…
When using ECUHELP KT200 to write edc17cp42 Citroen ecu clone on bench, I got info “End Writing.ADDRESS 018000:Non-erasable sector in Bench mode” (shown as below”). Possible Reason: You have another…
Have ECUHELP KT200 to read/write ME17.3.0 without any problem, but checksum failed, how to correct the checksum ME17.3.0? Look at this info KT200 gave me: checksum not supported for full…
ecuhelpshop